PeriBest Pumps I12, Руководство пользователя

Страница: 19 / 29

MANUAL PERIBEST I12 – I17 – I21
19 | 29
Maintenance
General
WARNING
Disconnect the pump from the mains.
You may only carry out work on the pump after it has previously
been switched off and disconnected from the mains.
In case the motor is fitted with a frequency controller and has a
single-phase power supply, wait two minutes to make sure that the
capacitors have discharged.
WARNING
Use only original PeriBest parts when maintaining the pump.
Peribest cannot correct operation and any consequential damage
that occurs from the use of non-original PeriBest components.
Maintenance schedule
The following maintenance scheme shows the maintenance and periodic inspections that need to
be carried out on the hose pump to guarantee an optimal safety, operation and life of the pump.
Point Action Frequency
1 Check the lubricant level. Before start-up of the pump and on a
scheduled interval during operation.
2 Check the pump head for any leakage of
lubricant around the cover, the flanges and
the rear of the pump head. Before start-up of the pump and on a
scheduled interval during operation.
3 Check the gearbox on any leakage. Before start-up of the pump and on a
scheduled interval during operation.
4 Check pump for deviating temperature or
strange noises.
On a scheduled interval during operation.
5 Check pressing rollers for excessive
damage.
When replacing the hose.
6 Internal cleaning of the hose.
Cleaning of the system or product change.
7 Replacing hose. Preventive, this means after 75% of the hose
life of the first hose.