Pergola kits USA VINYL CLASSIC FREESTANDING PERGOLA, Руководство по сборке, Страница: 1 / 8

P a g e | 1
VINYL CLASSIC FREESTANDING PERGOLA
ASSEMBLY INSTRUCTIONS
Shown: 8' x 12' Vinyl Classic Pergola with 12" Top and Main Runner Spacing
The design of this pergola is based on all posts being installed plumb and all beams and rafters
level. Patios are usually built with a slope to allow rainwater run-off. This factor must be taken
into account before beginning assembly of the kit, so that the tops of the posts, and therefore the
beams and runners are all level.
Some posts may need to be cut. You can also shim posts to attain the proper heights of the posts.
The vinyl sleeves and the wood inserts are the same size, so both will need to be cut. Cutting vinyl
should be done with a fine tooth circular saw blade, or hand saw so it does not chip. Cut through
both at the same time. If attaching to footers or a wooden deck, this must also be
checked for level. If there are questions – call before permanently mounting the posts.