Performance Tool W50031, Руководство пользователя

Страница: 7 / 12

7
ACCESSORIES
Use only accessories that are recommended by
the manufacturer for your model. Accessories
that may be suitable for one tool may become
hazardous when used on another tool.
Always attach grounded (3-prong) extension
cords to grounded (3-hole) outlets.
This product should be grounded. In the
event of an electrical short circuit, grounding
reduces the risk of electric shock by providing
an escape wire for the electric current. This
product is equipped with a cord having a
grounding wire with an appropriate grounding
plug. The plug must be plugged into an
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
If you must use an extension cord, be sure that
the gauge is large enough to carry the amount
of current necessary for your power tool. If
not, your tool may experience a loss of power,
excessive voltage drop or overheating. The
smaller the gauge number, the heavier the cord
(see table below).
WARNING
Always unplug rotary tool
before changing accessories, changing
collets or servicing. The tool could start
unexpectedly, causing serious injury.
1. Press the shaft lock button. Rotate the
shaft manually until the lock engages and
prevents further rotation.
WARNING
Do not engage lock while the
rotary tool is running.
2. With the shaft lock button engaged,
loosen collet counter-clockwise enough
to remove the old accessory (if any) and
install the new accessory, being sure to
push it as far as possible into the collet.
NOTICE
Never force a larger diameter
shank into a collet. Always match the
collet nut to the shank size of the acces-
sory to be used.
3. With the shaft lock button still engaged,
tighten collet clockwise by hand to
secure accessory in place.
INSERTING/REMOVING ACCESSORIES
COLLET
COLLET NUT
SHAFT LOCK
BUTTON
KEYLESS
CHUCK
ASSEMBLY
Release
Grip