background image

OWNER’S MANUAL

Item Number W2251

WARNING

It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and 

maintenance instructions contained on the product label and instruction manual prior to operation 

of this product. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning 

labels and while in use, maintaining the unit in good working order. If the owner and/or operator 

are not fluent in English, the product warnings and instructions shall be read and discussed with 

the operators’ native language by the purchaser/owner or his designee. Make sure that the 

operator comprehends its contents. Safety information shall be emphasized and understood prior 

to usage. The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this 

product must also be of sound mind and body and must not be under the influence of any 

substance that might impair their vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage! 

If you encounter any problems or difficulties, please contact our customer service department at:

1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time. 

13 WATT FLUORESCENT WORKLIGHT

12. Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges 

and refrigerators. There is an increased risk 

of electric shock if your body is earthed or 

grounded.

13. Do not expose power tools to rain or wet 

conditions. Water entering a power tool will 

increase the risk of electric shock. 

14. Do not abuse the cord. Never use the 

cord for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, 

sharp edges or moving parts. Damaged or 

entangled cords increase the risk of electric 

shock. Always grasp plug, not cord, when 

unplugging from an outlet.

15. When operating a power tool outdoors, 

use an extension cord suitable for outdoor 

use. Use of a cord suitable for outdoor use 

reduces the risk of electric shock.

16. Use power tool ONLY on adequately rated circuits 

to avoid overheating of electrical systems. 

17. Prevent accidental starting. Ensure switch 

is in the “OFF” position before connecting to 

power source and/or battery pack, picking 

up or carrying the tool. Carrying power tools 

with your finger on the switch or energizing 

power tools that have the switch “ON” invites 

accidents.

18. Do not use the power tool if the switch 

does not turn it on and off. Any power tool 

that cannot be controlled with the switch is 

dangerous and must be repaired.

19. Maintain labels and nameplates on the tool.  

These carry important safety information.  If 

unreadable or missing, contact Performance 

Tool® for a replacement.

20. Disconnect the plug from the power source 

before any adjustments or changing bulbs. 

Such preventive safety measures reduce the 

risk of starting the power tool accidentally.  

Unplug work light and any connected 

equipment when not in use.

1 YEAR LIMITED WARRANTY

PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties 

give specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties 

and all exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state.

PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use 

and service. A defective product may be returned for a free replacement within 90 days from the date of purchase, 

provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one 

year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall 

disclose to be defective and under warranty. These warranties shall be valid only when a sales receipt showing the date of 

purchase accompanies the defective product or defective part(s) being returned. For part(s) after 90 days, please remit 

your request, postage prepaid to: PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138 

These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be 

replaced under normal use and service. These warranties shall not apply to any product or part which is used for a 

purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its 

performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse, 

neglect, accident or wear and tear incident to normal use and service. PERFORMANCE TOOL® does not authorize any 

other person to make any warranty or to assume any liability in connection with its products. Except for warranties of title 

and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied warranties of 

any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability 

and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, 

family or household use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of 

merchantability (and, if otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the 

particular qualities or characteristics, and for the duration, expressly warranted above. The laws on limitation of implied 

warranties may differ from state to state, so the above limitations may not apply in all cases. PERFORMANCE TOOL® 

shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any product, 

or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part 

shall be the repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, 

incidental or special damages may vary from state to state, so the above limitations may not apply in all cases.

© Copyright 2014 WILMAR CORPORATION,  P.O. Box  88259 Tukwila, WA 98138 

Отзывы: