13
3. If you do not want to proceed with erasing the codes, press the
SCROLL
button to exit.
4. If you do wish to proceed to erase the codes, then press the
ENTER
button.
5. If the codes are cleared successfully, an
“ERASE DONE!”
message
will show on the display. Press the
ENTER
button to Return to the main
Menu list.
6. If the codes are not cleared, then an
“ERASE FAIL!”
message will
appear. Press the
ENTER
button to Return to the main Menu list.
HOT KEY:
Press and Hold the SCROLL button for about 3 seconds will
allow you to erase the DTCs more quickly than through the main menu.
Retrieve I/M Readiness Status
IMPORTANT:
I/M Readiness function is used to check the operations of the
Emission System on OBD2 compliant vehicles. It is an excellent function to
use prior to having a vehicle inspected for compliance to a state emissions
program.
An I/M Readiness Status result of
“NO” does not necessarily indicate that
the vehicle being tested will fail the state I/M inspection. For some states,
one or more such monitors may be allowed to be
“Not Ready” to pass the
emissions inspection.
YES
– all monitors supported on the vehicle have completed their
diagnostic testing and the MIL light is not on
NO
– at least one monitor supported on the vehicle has not
completed its diagnostic testing, and (or) the
“Check Engine”(MIL) light
is on
READY
– indicates that a particular monitor being checked has
completed its diagnostic testing
