GM HOOK P/N 1028 INSTALLATION INSTRUCTIONS
P
ERFORMANCE
A
DVANTAGE
C
OMPANY 11-2018
CAUTION
To avoid the risk of personal injury, property damage or product damage, please use the included
fasteners for mounting.
* The bracket must be securely mounted to a stable surface and material.
* PAC recommends regular and frequent inspections to be certain of proper operation and installation.
NO DRILLING OR FASTENERS REQUIRED
For additional assistance call 888-514-0083 between 8AM-5PM EST or email: [email protected]
INS-1028
www.pactoolmounts.com
Step #1 – Clean Surface
Fully clean the surface with a
solution consisting of 50%
water-50 % isopropyl alcohol.
Step #2 – Remove Tape Backing
Peel the backing from
the double sided tape
and prepare to affix to
mounting surface.
Step #3 – Attach to Surface
Firmly and evenly
press bracket to the
mounting surface and
apply pressure
Wait 72 hours before
use to allow bond to
fully set.
NOTE: Mounting surfaces must be free of dirt, oils and grease. Surfaces must be flat and smooth and free of voids or
protrusions for maximum performance.
