Perenio Joule Eco Smart Heater Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 55

Perenio Joule Eco Smart Heater Скачать руководство пользователя страница 52

Installation and Operation Manual for

Perenio®

Joule Eco Smart Heater

Document version: 1.1.0

©Perenio IoT spol s r.o. All rights reserved

Page

52

of

55

5 Storage, Transportation and Disposal of Devices

The device is not intended for use in areas exposed to hazardous and harmful factors.

Long-term storage is only permitted in the original packaging in dark, dry, clean, and
well-ventilated enclosed areas. To prevent damage to the glass heating element, it is
recommended to store the device in one layer, either vertically or horizontally.

For disposal of devices and/or batteries, the User shall observe rules of the Directive
on Waste Electrical and Electronic Equipment (WEEE) according to which all electric
and electronic products, as well as batteries must be disposed of separately at the end
of their service life. Such devices and accessories must not be disposed of together
with unsorted municipal waste due to their potential to cause harm to the environment.

NOTE.

The User must comply with the temperature and humidity conditions of

storage and transportation specified in the Table of technical specifications of the
present Installation and Operation Manual.

The device may be shipped by any kind of covered vehicles (by rail, or road or in
sealed heated airplane compartments, etc.) in accordance with the requirements of
current regulatory documents applicable to fragile goods sensitive to moisture.

The device and its accessories shall be kept in original packaging during transportation.

Similar conditions shall apply to the device storage at the

Seller’

s warehouse.

If you need to move the assembled device, you should hold it by legs for floor
installation.

Do not dispose of the device together with unsorted municipal waste as this would be
harmful to the environment.

For the device disposal purposes, it shall be returned to the point of sale or to the local
processing center.

For detailed information on recycling of the present device, please contact your waste
management company.

«
...
50
51
52
53
54
...
»

Содержание Joule Eco Smart Heater
























































Отзывы:

Нет отзывов