Installation and Operation Manual for
Perenio®
Joule Eco Smart Heater
©Perenio IoT spol s r.o. All rights reserved
Document version: 1.1.0
Page
21
of
55
2.1.2 Floor Installation (Option 1)
Figure 5
–
Mounting on legs (Floor)
1.
Arrange the device on a clean, horizontal surface with the heat-radiant panel
facing downwards.
2.
Tighten the mounting brackets to the rear surface of the panel (Skip this step,
if mounting brackets were pre-installed by the manufacturer).
3.
Tighten the two metal legs to mounting brackets through the holes using screws
(See Figure above).
NOTE
that for the floor installation version, the Eco Smart Heater may only be
oriented horizontally as shown in the Figure above.
During installation, please ensure that the screws are securely tightened and that
the legs are oriented correctly towards the device panel (See Figure above).
Содержание Joule Eco Smart Heater
Страница 2: ......