CSOL06
V. 01 – 12/11/2015
5
©Velleman nv
b.
The Battery
It is recommended to charge the battery for 1 or 2 days in direct
sunlight before the first use. This will increase battery life
expectancy.
1.
Switch off the device
[1]
before (re)placing batteries.
2.
Loosen the screws at the back of the device
[2]
and remove the
covers.
3.
Place a new battery of the correct size and type in the device.
Respect the polarity!
4.
Replace the covers and fix them by tightening the screws.
c.
Mounting on the Wall
Fix a screw into the wall and let it protrude at least 5mm. Hang the
lamp unit on the screw
[3]
.
6.
Cleaning and Maintenance
Keep the solar panel
[4]
clean to optimise performance.
It is recommended to change the battery once per year.
7.
Technical Specifications
solar panel
4V / 82.5mA
light source
2 LEDs: 0.3W - 12,000mcd (lower, main part),
0.07W - 2000mcd (front and side strips)
light colour
white
rechargeable
battery
1x 3.2V Li-Battery (LiFePo4), 500mAh
operating time
6~8h when fully charged
dimensions
78 x 170 x 50mm
weight
±230g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
