Instrument
Components:
KS1,KS2
KS2 - 850mm
Ground Surface
KS1 - 700mm
Installation Instructions
20 Kg
4
. Once all mounts are fixed in
place attach the notes using
M8 Barrel Nuts and Pin torx
bit.
1
. Mark hole positions on wall,
then drill to manufacturers
specified diameter and depth
of M10 rawl bolt (See Wall Fix
installation sheet)
2
. Once holes are drilled insert
M10 rawl bolts into holes and
set in place to secure tightly
3
. Attach wall mounts onto
rawl bolts making sure they
are tight to the wall and have
the large holes to the outside.
Use a long tool to tighten
further.
1m
1 Small Red and 1
Large Red
Weight of heaviest part
18kg
(Mirror Chimes)
BS EN 1176
Wall Fixed
M8 Barrel Nut
x4
Mirror Chimes
Page 1 of 3
Wall mounts
x4
1m
1m
Install Instrument with 1m free space (from widest point) around it.
Wall fixings are not supplied, installer will select suitable method
of fixing. Suggested Fixing M10 Rawl Bolt
Metric Conversion:
700mm/ 28”
850mm/ 33”
1m/ 39”
CAUTION: Bell Lyre
surface can get hot
in direct sunlight, if
possible install in
shaded areas.
Spares available form
percussionplay.com
or from your
local distributor
