Ground Fixed
Components:
1. Carefully lay 3 x legs on a
level surface and check
distance between each leg is
equal. Join together the 2
parts of the symphony. Line
up pre drilled holes in the
backboards with the legs and
ensure the instrument is
aligned square with the legs.
Fix in place using M8x40mm
screws supplied (see
installation guide)
2.(See ground fix
sheet)Excavate 3 holes on
site of installation
approximately 500mm deep (
adjust depth according to age
range for intended players)
3. Carefully raise the
instrument from the ground
with legs attached and locate
(lower) legs into holes making
sure they are vertical and
level prior to concreting in
place.
Installation Instructions
4. Once happy with location
and levels, fill holes using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines
5. Beaters can be fixed to
Stainless Steel posts with
fixings provided
KS2
–
1100mm
KS1
–
900mm
Ground Surface
25 Kg
BS EN 1176
1.5m
Weight of heaviest part
12kg
(Freechimes Left Panel)
1.5m
KS2 500mm/
KS1 700mm
Install Instrument
with 1.5m free space
(from widest point)
around it.
Freechimes
Pentatonic
Symphony
Page 1 of 4
M6x20mm
Secure Screw
X6
Eye Straps
X3
M8x40mm
Secure Screw
X10
M8 Lock Washer
X10
M10x200 Threaded Bar
x6
M10 Nut
x12
Ground Fix
Components:
Metric Conversion:
500mm/ 24”
700mm/ 33”
1.5m/ 59”
Spares available from
percussionplay.com
or from your
local distributor
Pair Large Red
Beaters X1
Pair Small
Beaters X2
