PERCo TTR-08A, Руководство по сборке и эксплуатации

Страница: 10 / 34

TTR-08A Electromechanical Tripod Turnstile
Figure 4. Control Logic Board (CLB)
The CLB (Fig. 4) includes:

X1 ( LED ), X2 ( SENS ), X3 ( MOTOR ) connectors to connect the indication module,
optical arm rotation sensors and control mechanism with a locking device (from the
X1, X2, X3 connectors with the turnstile cable);

XT1.L ( In ) connector block to connect the RC panel / WRC / ACS controller inputs
as well as an emergency unblocking device (
Fire Alarm)
and intrusion detector;

XT1.H ( Out ) connector block to connect a siren and ACS outputs, providing the
turnstile status data to the ACS controller;

XT3 ( +12VDC ) connector block to connect the turnstile power supply;

XT4 ( Light A ) and XT5 ( Light B ) connector blocks to connect “open/closed” remote
indicators, one indicator per each direction;

XT6 ( AntiPanic ) connector block to connect the electromagnet of automatic
anti-panic unblocking device;

J1 connector to select the turnstile control mode, the jumper is fixed — the pulse
control mode, the jumper is not fixed — the potential control mode. The jumper is
fixed at the factory before the delivery

J2 connector for programming.

Power – power LED indicator on the control board.
5.3 Control devices of the turnstile
The turnstile can be operated from the following control devices:

the RC panel;

the WRC;

the ACS controller.
The above devices can be connected to the turnstile as follows:

any device separately;

in any combination with each other;

all devices simultaneously (in parallel).
9