background image

RTD-03S Waist-high rotor turnstile 

Dear customer! 

We thank You for choosing the turnstile manufactured by PERCo.  

You have purchased the high quality product, which will be long lasting  

in operation provided that installation and operation rules are observed. 

The operation manual for RTD-03S waist-high rotor turnstile contains data that is necessary for the 

most full usage of operating advantages of the turnstile as well as chapters on packaging, 

installation and maintenance.  Only qualified personnel, following the instructions of this Manual, 

must carry out installation and maintenance. 
Abbreviations and terms used in this Manual: 

 

ACS – access control system; 

 

CU – control unit; 

 

RC – remote control panel; 

 

SPS – standby power supply. 

1  APPLICATION 

The turnstile is designed for managing pedestrian flows at entrance checkpoints of industrial 

facilities, banks, administrative buildings, retail outlets, railway terminals, airports, etc. 
To ensure fast and convenient passage it is recommended to install one turnstile per every 500 

people, working in the same shift, or on the basis of maximum working load 23 persons/min. 

2  OPERATION CONDITIONS 

The turnstile post, in accordance with the resistance to environmental exposure, is compliant with 

GOST 15150-69, category U4 (operation in premises with climate control). 
Operation of the turnstile post is allowed at ambient temperature b1°C and +45°C and 

relative air humidity up to 98% at +35°C. 
The control unit, in accordance with the resistance to environmental exposure, is compliant with 

GOST 15150-69, category NF4 (operation in premises with climate control). 
Operation of the control unit is allowed at ambient temperature b1°C  and +40°C  and 

relative air humidity up to 80% at +25°C. 

3  TECHNICAL SPECIFICATIONS 

AC operating voltage ............................................................................... 220 ± 22 V AC / 50 ± 1 Hz 

Power consumption ......................................................................................................... max. 60 W 

Turnstile post input DC voltage  ........................................................................................  max 36 V 

External power supply input DC voltage ..............................................................................  24÷27 V 

Throughput in the single passage mode ................................................................... 23 persons/min 

Throughput in the free passage mode ....................................................................... 30 persons/min 

Passageway width ............................................................................................................... 600 mm 

Operation time from the built-in SPS ................................................................................. min 1.5 hr 

Number of passages when operating from the built-in SPS ................................ min 1200 passages 

Rotor rotation force (at the center of the barrier wing) ..................................................... max 1.5 kgf 

Mean time to failure ...................................................................................... min 1000000 passages 

Mean lifetime .................................................................................................................. min 8 years 

Electric shock protection class: 

Turnstile post ......................................................................................................... III (IEC 61140) 

Control unit .............................................................................................................. I (IEC 61140) 

Ingress Protection Rating:  

Turnstile post ...................................................................................................... IP41 (EN 60529) 

Control unit ......................................................................................................... IP40 (EN 60529) 

Turnstile overall dimensions, see Fig. 1, (length × width × height) .................. 1202×1202×1007 mm 

Net weight of the turnstile post .......................................................................................... max 43 kg 

Control unit overall dimensions (length × width × height) ....................................... 295×290×76 mm 

Net weight of the control unit ...........................................................................................  max 8.7 kg 

Содержание RTD-03S



























Отзывы:

Похожие инструкции для RTD-03S