PERCo IP-Stile KT-05.4, Руководство по сборке и эксплуатации

Страница: 4 / 14

IP-Stile KT-05.4
3
Dear Customer!
Thank you for purchasing PERCo IP-Stile.
Please follow instructions given in this Manual carefully,
and this quality product will provide many years of trouble-free use.
This Manual contains information that is necessary for comprehensive use of capabilities
of the
K
Т-05.4 IP-Stile
.
Abbreviations adopted in the Manual:
RC-panel – remote control panel;
PC – personal computer;
ACM – access control mode;
ACS – access control system;
OD – operating device.
1 APPLICATION
KT-05.4 IP-Stile (hereinafter – IP-Stile) is designed for control of access to a facility by
means of proximity cards. Access control through IP-Stile is performed by the operator with
the RC-panel, which is included in the standard delivery set or, after additional setting,
using
PERCo-Web software, with the proximity cards.
IP-Stile can operate either as a standalone unit, without permanent connection to the local
network or a PC, or as a part of
PERCo-Web security system. All the registered events are
logged in the nonvolatile memory of the IP-Stile controller. As a part of PERCo-Web ACS
supports all the performance capabilities of the system.
Up to 8 CL-201 controllers can be connected to the IP-Stile. Each controller has a built-in
reader and allows to control one electromechanical (electromagnetic) lock. This gives an
opportunity to provide one-direction access to eight rooms by proximity card presentation.
2 DESIGN
IP-Stile consists of a housing with built-in controller, two proximity-card readers with
indication modules, three barrier arms, RC-panel (ref. Figure 1, parts 1-3, 5 and 9) and
software to work as a part of
PERCo-Web ACS. After each passage through IP-Stile the
barrier arms are automatically reset in the home position.
For visual informing on current IP-Stile status both housing end faces are equipped with
indication modules. An access card reader is built-in inside the housing under each
indication module.