Certificate & Operation Manual
2
The storage of
FP-01C
panel
in the original package
is allowed indoors at ambient temperature
from -
40°C to +50°C and at relative air humidity up to 80% at +15°C. In the storage room should
also be no acid fumes and gases, causing the corrosion.
After transportation and storage of the card capture reader at negative temperatures or high
humidity, it is necessary to keep it in package within the required operation conditions for minimum
24 hours before installation.
Due to constant improvement of the products manufacturer has a right to make any modifications
of the equipment, which do not make its technical specifications worse without prior notice.
2 TECHNICAL SPECIFICATIONS
DC operating voltage .............................................................................................. 21.6-28 V DC
Current consumption .................................................................................................... min. 1.8
1
A
Power consumption ...................................................................................................... max. 56 W
Card container capacity ................................................................................................ 150
– 300
2
Mean time before failure ................................................................... min. 1,000,000 card captures
Mean lifetime ............................................................................................................. min. 8 years
Electric shock protection class ................................................................................ III (IEC 61140)
Ingress Protection Rating .................................................................................... IP41 (EN 60529)
Overall dimensions (L × W × H) ........................................................................ 140×180×987 mm
Weight (net) .................................................................................................................. max. 7 kg
3 DELIVERY SET
FP-01C
panel ............................................................................................................................. 1
Key from the card container lock ................................................................................................ 2
Certificate & Operation manual
................................................................................................... 1
Transportation box
..................................................................................................................... 1
Figure 1. ST-01 Section with installed FP-01C panel
1
Built-in card capture reader power supply is provided either by a separate power supply 24VDC -2A or
ST-01
turnstile power supply (in this case, the power supply should provide general absorbed current not
less than 8A during 10 seconds).
2
Depending on the card thickness (2 mm or 0.9 mm).
Содержание FP-01C
Страница 21: ......
