PERCo CT/L-14, Руководство по сборке и эксплуатации

Страница: 47 / 58

User Manual
46
3. In the opened window make the necessary changes of the settings:
•
Number parameter sets the response number in the controller database (from 1 to 40);
•
Source type parameter sets the launch condition of the controller response;
•
Source (Receiver) number
and
Source direction
(
Receiver direction
) parameters set
numbers and directions of corresponding resources of the controller which are response
sources (receivers);
•
Receiver type
parameter sets the controller response under condition of the response
launch;
•
Response time
and
Response characteristics
parameters set corresponding response
settings.
4. Click the Save button. The Internal response window will be closed; the changed settings will
be passed to the controller.
5. To exit the Internal response window without saving changes, click the Cancel button. Also,
it is possible to close the window using the Close button .
6. To remove the response from the list, click the Delete button. The window Internal response
will be closed; the internal response will be deleted.
4.2.5 Events filter
To configure events filter, proceed as follows:
1. Click consistently Configuration

Edit

Events filter in the Web-interface menu. The
page with working area will be opened: