Pepperl+Fuchs VBG-PN-K30-D-S16, Руководство пользователя

Страница: 66 / 130

27
.9.20
13
66
AS-i 3.0 PROFINET Gateway with integr. Safety Monitor
Function and startup of the Safety Monitor
10.5.1 Diagnostic values in the IDI
The input values for safety-relevant input slaves can be substituted in various
ways. This makes the diagnostics information available directly in the cyclical I/O
data. The default setting is the "substitution values" for the two input channels.
Setting diagnostics values also sends 2 bits of color information for the associated
safety-relevant component in addition to the input channels. The substitution pos-
sibilities are defined in the following tables:
IDI diagnostics can be optionally enabled for the following devices:
• VBG-PN-K30-D-S16 ident. no.
≥
15050
• VBG-PN-K30-DMD-S16 ident. no.
≥
15051
• VBG-PNS-K30-DMD ident. no.
≥
15054
• VBG-PN-K30-DMD-S16-EV
ident. no.
≥
15216
Bit 3 Bit 2 Bit 1 Bit 0 Description
0 0 0 0 Both channels off
0 0 1 1 2nd channel off, 1st channel on
1 1 0 0 2nd channel on, 1st channel off
1 1 1 1 Both channels on
Tab. 10-8. Default status substitution values
Bit 3 Bit 2 Bit 1 Bit 0 Description
0 0 Both channels off
0 1 2nd channel off, 1st channel on
1 0 2nd channel on, 1st channel off
1 1 Both channels on
0 0 Device color: red, green or blue
0 1 Device color yellow: ("wait")
1 0 Device color: yellow flashing ("test")
1 1 Device color: red flashing ("error")
Tab. 10-9. Diagnostic values
Information!
The switching state of channel 1 and channel 2 (channel 1, channel 2 'on' or 'off', bit 0,
bit 1) is sent at optimal speed. The device colors (bit 2, bit 3) have device-internal lower
priority and can be sent slower.
The diagnostic values bit 0/1 and 2/3 are not synchronized. The states of the input
channels and the resulting color can be sent at different times.