Pepperl+Fuchs Pulscon LTC, Описание функций прибора, Страница: 51 / 80

Pulscon LTC
Function group "output" (06), - "profibus param." (06), PROFIBUS PA only
D
O
C
T
-0
0
9
4
A
0
6
/2
009
12
07
82
51
8.16 Function "select v0h0" (068), PROFIBUS PA only
Selects the val u e displayed in "measured value" (000) .
Selection:
• measured value
• display val u e
measured value
The config u red meas u red val u e is displayed in the "measured value" (000) f u nction.
display value
The val u e in "display value" (069) is displayed in the "measured value" (000)
f u nction.
"
Caution!
This f u nction is availa b le for PROFIBUS PA devices only!
8.17 Function "20mA value" (069), HART only
In this f u nction, enter the level (or vol u me, weight) at which the o u tp u t c u rrent sho u ld b e
20 mA. This entry is only req u ired if yo u have selected the "current turn down" option
in the "curr. output mode" (063) f u nction.
"
Caution!
This f u nction is availa b le for HART devices only!
8.18 Function "display value" (069), PROFIBUS PA only
This field can b e set externally, e. g. from a PLC. The val u e is then displayed as the
main meas u red varia b le in the display b y selecting the
"select v0h0" (068) = "display value" f u nction.
"
Caution!
This f u nction is availa b le for PROFIBUS PA devices only!

E
+
–

E
+ –

E
+ –