Pepperl+Fuchs PROFINET IO Power Hub Скачать руководство пользователя страница 9

Страница: 9 / 56

PROFINET IO Power Hub

Product Specifications

016-

2.2

System Components

Motherboards

The following types of gateway motherboards are available:

■

Compact motherboard MBHC-FB-4.GT: Slots for 1 gateway HD2-GTR-4PA.PN,

4 simplex power supply modules, and 1 diagnostic module. For further information, refer

to the documentation for MBHC-FB-4.GT.

■

Gateway motherboard MB-FB-GTR1: 2 slots for up to 2 gateway modules HD2-GTR-

4PA.PN. The gateway motherboard is designed for the use with Power Hub motherboards

holding power supply modules for the supply of PROFIBUS PA segments. The

motherboard can be used with a single gateway for simplex coupling to PROFINET IO or

with 2 gateways for redundant coupling. At the point of issue of this manual, redundant

coupling is not supported yet. For more information, contact you Fuchs

representative.
MB-FB-GTR1 can be used with the following Power Hub motherboards:

• MBHC-FB-4.HSC* supports 4 simplex segments, redundant bulk power supply

• MBHC-FB-4R.HSC* supports 4 redundant segments, redundant bulk power supply

• MBHD-FB-D-4R.GEN supports 4 redundant DART intrinsically safe segments,

redundant bulk power supply

The motherboards are connected with a customized cable that is included in the delivery

of the gateway motherboard.

For further information refer to the respective product documentation at www.pepperl-

fuchs.com.

Gateway

The PROFINET/PROFIBUS PA gateway module HD2-GTR-4PA.PN connects 4 PROFIBUS PA

segments to PROFINET IO on the performance level

“

real-time RT

”

. It supports 2 Ethernet-

switched ports for PROFINET S2 system redundancy and media ring redundancy based on

the media redundancy protocol (MRP).
The gateway features LEDs to diagnose the status of the Ethernet ports, gateway hardware,

redundancy, and the PROFIBUS PA segments.
For system integration the software tool "PROFINET GSD generator" is provided. The

generator builds a PROFINET GSD including all gateway and PROFIBUS PA device-specific

information required for engineering the PROFINET IO system. As input, the GSD files of the

PROFIBUS PA devices used in a specific project are required. The PROFINET GSD is

generated out of the individual GSD files.
Both, a gateway device type manager (DTM) and a PROFINET communication DTM enable

the access and use of the device manufacturer DTMs in oder to parameterize and diagnose the

individual PROFIBUS PA devices.
A web server provides access to gateway-specific and optional physical layer status read-only

information of the 4 segments. Update functionality of gateway firmware is provided.
The gateway is compatible with the motherboards of the following Power Hubs:

■

Universal Power Hubs MB–FB–GT, MB–FB–GTR, MBHC–FB-4.GT, MB-FB-GTR1

■

Compact Power Hub KT–MB–GTB–2PS

■

DART Power Hub KT–MB–GTB–D–2PS

Application documents for the integration of the PROFINET Power Hub into various control

systems are available. For more information, contact your Fuchs representative or visit

pepperl-fuchs.com.

Содержание PROFINET IO Power Hub

























































Результаты поиска

Содержание PROFINET IO Power Hub

Отзывы:

Похожие инструкции для PROFINET IO Power Hub

Бренды по названию

Популярные бренды

Pepperl+Fuchs PROFINET IO Power Hub, Руководство пользователя

Результаты поиска

Содержание PROFINET IO Power Hub

Отзывы:

Похожие инструкции для PROFINET IO Power Hub

Бренды по названию

Популярные бренды