Pepperl+Fuchs OIT F113-B12-CB Series Скачать руководство пользователя страница 18

Страница: 18 / 80

9165

201

OIT***-F113-B12-CB*

Installation

5.1

Preparation

Unpacking the unit

1. Check that all package contents are present and undamaged.

If anything is damaged, inform the shipper and contact the supplier.

2. Check that all items are present and correct based on your order and the

shipping documents.

If you have any questions, please contact Fuchs.

3. Keep the original packing material in case you need to store or ship the unit at

a later time.

5.2

Mounting the Device

The device has a preassembled mounting base with four M6 threads positioned

symmetrically on the base of the housing to allow easy installation of the OIT

system in your plant.
The following illustration shows all the relevant housing dimensions in mm:

Figure 5.1

Dimensions of the OIT300 and OIT500 system

4xM6

156

256

Содержание OIT F113-B12-CB Series

















































































Результаты поиска

Содержание OIT F113-B12-CB Series

Отзывы:

Pepperl+Fuchs OIT F113-B12-CB Series, Руководство пользователя, Страница: 18 / 80

Результаты поиска

Содержание OIT F113-B12-CB Series

Отзывы: