LAYER THICKNESS SENSOR
Installation
2
0
4
697
2
007
-0
9
EN - 11
EN
3.2
Connection
Read the chapter on Safety and, in particular, the section on Installation and commissioning
(see chapter 1.6.1) before connecting the sensor. Do not remove the identification plate.
When making the connection, ensure the polarity of the sensor cables is correct. The loop
resistance of the extension cable should not exceed 20
Ω
for the sensor.
1
Layer thickness
2
Alarm level
3
Sensor KVF-103-PF
4
Water
5
Oil
1
2
4
5
3
Warning!
Risk of short circuit
Injuries and damage to the device are possible when working with live parts.
•
Before working on the device, always disconnect the supply voltage.
•
Connect the device to the supply voltage only after completion of the work.
Note!
For additional information on connecting the sensors to the warning device, refer to the manual
of the warning device NVO5-11.
Содержание KVF-103-PF
Страница 18: ...204697 2007 09 LAYER THICKNESS SENSOR Notes 16 EN ...
Страница 34: ...204697 2007 09 16 SCHICHTDICKENSENSOR Notizen ...
Страница 50: ...204697 2007 09 LAYER THICKNESS SENSOR Notes ...
Страница 51: ...204697 2007 09 LAYER THICKNESS SENSOR Notes ...