Pepperl+Fuchs IDM-Z2-161-M-1D-J2-BT-N-N0, Руководство пользователя

Страница: 19 / 36

IDM-Z2-161-M-1D-J2-BT-N-N0, IDM-Z2-161-M-1D-J2-BT-P-N0, IDM-Z2-261-M-2D-J2-BT-
N-N0
2
02
2-
01
19
5 Commissioning
The battery BAT-IDM-Z2-x61-M is required for commissioning the Bluetooth ® Zone 2/22 hand -
held barcode reader.
5.1 Preparing Bluetooth ® Handheld Scanners
Preparation of Bluetooth ® handheld readers
The battery compartment is on the underside of the Bluetooth ® handheld reader. Loosen the
screw with a suitable tool to remove the cover. After loosening the screw, some force is required
to remove the cover.
Figure 5.1 Removing the battery compartment lid.
The battery is required to commission the Bluetooth
®
handheld reader. The protective cap
must be removed before inserting the battery into the handheld reader.
Caution!
Battery!
Only this battery, which is intended for this purpose, may be used!
Note
Charge the new battery pack for 8 hours prior to the first use!
Danger!
The battery must not be changed or inserted in explosion-hazardous areas. Improper handling
can void the type approval.