Pepperl+Fuchs AS-I 3.0 PROFINET, Руководство пользователя

Страница: 28 / 72

3
1
.1
.20
1
4
28
AS-i 3.0 PROFINET Gateway in Stainless Steel
Electrical connection
7.5 PROFINET interface
Connection to an Ethernet network is carried out using the one of the two RJ45
sockets on the left housing side (see section <Overview of terminals, indicators
and operating elements>).
The two sockets lead to an integrated real-time switch. They are based on MDI/
MDI-X (auto-crossover) and support 100Base-TX und 10Base-T networks in
each case with full- and half duplex (auto negotiation).
LEDs in the sockets (2 per socket):
7.6 Diagnostics interface (only with: VBG-PN-K20-D, VBG-PN-K20-DMD-EV,
VBG-PN-K20-DMD)
The service and diagnostics interface (in conjunction with AS-i Control Tools
software) is used for communication between the PC and the unit.
7.6.1 Diagnostics port RS 232
The service and diagnostics interface is configured as a mini DIN-6 female and it
is placed at the top of the housing (see section <Overview of terminals, indicators
and operating elements>).
2
1
LEDs
LEDs
RJ45 socket
RJ45 socket
Information!
The switch will operate only if supply voltage (± PWR) is present.
Port (green)
LED flashes green: ethernet connection active (i.e. cable plugged in).
Activity (yellow)
LED flashes yellow: transmitting/receiving active.