peplink Pepwave Surf SOHO, Руководство пользователя

Страница: 16 / 151

Installation
The following section details connecting Pepwave routers to your network.
Preparation
Before installing your Pepwave router, please prepare the following as appropriate for your installation:
● At least one Internet/WAN access account and/or Wi-Fi access information
● Depending on network connection type(s), one or more of the following:
● Ethernet WAN : An ethernet cable with RJ45 connector
● USB : A USB modem
● Wi-Fi WAN : Wi-Fi antennasA computer with the TCP/IP network protocol and a web browser installed.
Supported browsers include Microsoft Internet Explorer 11 or above, Mozilla Firefox 24 or above, Apple Safari 7 or
above, and Google Chrome 18 or above.
Constructing the Network
Construct the network according to the following steps:
1: With an Ethernet cable, connect a computer to one of the LAN ports on the Pepwave router. Repeat with different
cables for up to 4 computers to be connected.
2: With another Ethernet cable or a USB modem/Wi-Fi antenna/, connect to one of the WAN ports on the Pepwave
router. Repeat the same procedure for other WAN ports.
Connect the power adapter to the power connector on the rear panel of the Pepwave router, and then plug it into a power
outlet.
Connecting to the Web Admin Interface
Start a web browser on a computer that is connected with the Pepwave Surf SOHO through the LAN.
To connect to the web admin of the Pepwave Surf SOHO, enter the following LAN IP address in the address field of the
web browser:
https://192.168.50.1
(This is the default LAN IP address of the Pepwave Surf SOHO.) Enter the following to access the web admin interface.
Username : admin
Password : admin
(This is the default admin user login of the Pepwave Surf SOHO.)
https://www.peplink.com 16 Copyright @ 2021 Peplink