Standalone Configuration
When configuring the Switch in Stand Alone mode, InControl Management needs to be disabled.
After connecting to the management port and logging on to the Web Interface of the Switch, browse to
System > InControl
and configure the InControl settings to be disabled.
Your device will not be allowed to communicate with InControl.
Alternatively configure this option as
“Enable (Restricted to Status Reporting Only)”
to be able to
monitor the switch through InControl but manage it from the local web admin interface.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
