peplink PEPWAVE SD Switch 48-Port, Руководство пользователя

Страница: 19 / 67

3: The Switch will show online in InControl if InControl management is enabled on the switch and the
switch is able to connect to the InControl servers (the marker on the map will change from red to green).
Tip: If a device appears offline in InControl ,check the following knowledge base article for a solution:
https://forum.peplink.com/t/faq-why-does-my-device-appear-offline-on-incontrol-2-even-though-the-device
-has-an-internet-connection/
Enable InControl Cloud Management
InControl management needs to be enabled to allow the Peplink Switch to be configured through
InControl.This setting is enabled by default.
The settings can be changed in the local web interface of the Switch.
In Incontrol, browse to the Device Details page.
If it is not online, log on to the local web admin interface of the switch as described above.
Navigate to
​ System > InControl ​ , and then click the “ ​ Allow InControl Management ​ ” button
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.