Operator’s manual Pentruder RS2 wall saw and Pentpak 3 HFi power pack – Original instructions
Page 28
3.9.2
Batteries for radio remote control (RRC)
The RRC uses two built in Lithium Ion batteries.
Charging takes place when the RRC is connected to the Pentpak 3 with the CE-RRC cable.
The RRC batteries will last for approximately 100 hours of operation. There will be a warning on the display when the
batteries are low.
The batteries can be replaced. Contact your Pentruder authorized service center.
3.9.3
Using remote control (RRC) and Pentpak 3 (PP3) with radio
Your Pentpak is paired with the Radio remote control when delivered from your Pentruder distributor.
To activate the radio function in the RRC and Pentpak 3 you need to plug in the RRC activator plugs in the RRC and
Pentpak 3 respectively.
Should you need to use another Pentpak or Radio remote control the new combination needs to be paired. See
chapter 5.3 Menu functions.
Activator plugs
3.9.4
Using remote control (RRC) and Pentpak 3 (PP3) with cable
When using the
CE-RRC
Cable
for radio remote control the RRC will function like a cable remote control.
