Pentax OPTIO VS20, Руководство по эксплуатации

Страница: 192 / 240

190
6
Settings
Pixel Mapping is a function for mapping out and correcting defective
pixels in the CCD sensor. Run the Pixel Mapping function if image dots
always seem to be defective in the same place.
1
Press the 3 button in
A
mode, and press the four-
way controller (
5
) twice.
The [ W Setting] menu appears.
When you press the
3
button in
Q
mode, [Pixel Mapping]
cannot be selected.
2
Use the four-way controller (
23
) to select [Pixel
Mapping].
3
Press the four-way controller (
5
).
The [Pixel Mapping] screen appears.
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card/built-in memory is
formatted.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when the camera starts up in the
playback mode.
¥ Movies or images taken at f (16-frame shooting) or
F
(Digital
Panorama) mode cannot be used for the start-up screen.
Correcting Defective Pixels in the CCD Sensor
(Pixel Mapping)
Setting 3/3
Pixel Mapping
Format
MENU Exit
Downloaded From camera-usermanual.com