Pentax OPTIO SV, Руководство по эксплуатации

Страница: 62 / 180

60
Taking Pictures
4
You can take 3D pictures and view them by the parallel method or cross
method.
The default setting is [Parallel]. If you print out 3D pictures for viewing by
the parallel method and look at them through the optional 3D image
viewer, the image will appear in three dimensions.
You can also take 3D pictures for viewing by the cross method. Refer to
“Selecting the Viewing Mode” (p.62) for instructions on taking pictures by
the cross method.
1
Set the mode dial to PICT and press the four-way
controller (
23
).
The Picture Mode screen appears.
2
Use the four-way controller (
2345
) to select
G
(3D
Image mode).
3
Press the OK button.
The screen for taking the first image appears on the left of the LCD monitor.
4
Take the first image.
Hold the camera so that the subject is in the
middle of the left half of the screen and
press the shutter release button. The image
appears in the left half of the LCD monitor.
The right half of the screen is for taking the
second image.
Taking 3D Pictures (3D Image Mode)
Mode dial
Four-way controller
OK button
Shutter release button
7/ 7/2004 7/ 7/2004
3:00 PM 3:00 PM
7/ 7/2004
3:00 PM
100 100 100