Pentax MX-1, Руководство по эксплуатации

Страница: 161 / 244

159
4
Editin
g an
d Printi
ng Im
age
s
4
Use the four-way controller (
23
)
to choose a parameter you want to
change.
You can select a different image by turning
the e-dial.
The following parameters can be changed.
5
Use the four-way controller ( 45 ) to change the value.
Press the four-way controller (
5
) to display the setting screen for
White Balance and Custom Image.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Save as],
and press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (
23
) to select [Continue]
or [Exit], and press the 4 button.
Select [Continue] to edit other images. The screen for selecting the
parameter in Step 4 appears again.
Parameter Value Page
Aspect Ratio D
/
E
/
F
/
G p.98
JPEG Recorded Pixels
JPEG recorded pixels corresponding to
the aspect ratio
p.99
JPEG Quality Fine/Normal p.100
Custom Image
Bright/Natural/Vibrant/Reversal Film/
Monochrome
p.110
White Balance
F
/
G
/
H
/
^
/
J
D /
J
N /
J
W /
J
L /
I
/
L
/
K
p.100
Sensitivity -1.0 to +1.0 —
Shadow Correction On/Off p.104
Distortion Corr. On/Off p.106
OK OK
Capture Settings Capture Settings