Pentax MX-1, Руководство по эксплуатации

Страница: 123 / 244

121
2
Tak
ing Pi
ctures
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to
O (On)
(the settings are saved when the camera is turned off), while for others
you can choose
O or P (Off) (to choose whether the settings are saved
or not when the camera is turned off). The items which can be set to
O
or
P
in the Memory function are shown in the table below. (Items not
listed here are always saved in the selected settings when the camera is
turned off.)
If you select
O
, the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P , the
settings will be reset to the defaults when the camera is turned off. The
table below also shows whether the Memory default setting for each item
is
O
or
P
.
Item Description
Default
Settings
Page
Flash Mode The flash mode set with the four-way controller (
4
)
O
p.84
Drive Mode The drive mode set with the four-way controller (
2
)
O
p.87
Focus Mode
The focus mode set with the four-way controller
(
5
)
O p.89
Zoom Position The zoom position set with the zoom lever
P
p.60
MF Position
The manual focus position set with the four-way
controller (
23
)
O
p.90
White Balance
The [White Balance] setting in the [
A
Rec.
Mode 1] menu
O
p.100
Sensitivity
The ISO sensitivity set with the four-way controller
(
3
)
O
p.94
AE Metering
The [AE Metering] setting in the [
A
Rec. Mode 1]
menu
O p.97
Face Detection
The [Face Detection] setting in the [
A
Rec.
Mode 2] menu
O p.107
Digital Zoom
The [Digital Zoom] setting in the [ A Rec. Mode 3]
menu
O
p.62
DISPLAY
The information display mode selected with the
4
button
O
p.22