Pentax K-5II, Руководство по эксплуатации

Страница: 316 / 336

314
Appe
ndix
11
Autofocus
does not work The focus mode is
set to
\
Set the focus mode switch to
l
or
A
.
(p.108)
The focus
cannot be
locked
The focus mode is
set to
k
Autofocus is not locked (focus lock) when
the focus mode is set to
k
(
A
). The
camera will continue focusing on the subject
while the shutter release button is pressed
halfway. If there is a subject that you wish to
focus on, slide the focus mode switch to
l
and use the focus lock. (p.108)
The AE Lock
function does
not operate
The exposure
mode is set to
B
,
p
or
M
mode
Set the exposure mode to any mode other
than
B
(Green), p (Bulb Exposure) or
M
(Flash X-sync Speed).
The built-in
flash does not
discharge The exposure
mode is set to
B
mode
Only
C
(Auto Flash Discharge) and
D
(Auto Flash+Red-eye Reduction) are
available for the flash mode when the
exposure mode is
B
(Green). The flash will
not discharge when the subject is bright in
these modes. In the exposure modes other
than
B
, only the flash mode that
discharges every time the flash recharges is
available. Try different exposure modes.
The USB
connection with
a computer
does not work
properly
The USB
connection mode is
set to [PTP]
Set [USB Connection] to [MSC] in the [
R
Set-up 2] menu. (p.279)
Shake
Reduction
does not work
The Shake
Reduction function
is off
Set [Shake Reduction] to
k
(On) in the
[
A
Rec. Mode 4] menu. (p.122)
The Shake
Reduction function
is not set properly
If a lens for which the focal length
information cannot be obtained is used, set
the focal length in the [Input Focal Length]
screen. (p.124)
Shutter speed is too
low for the Shake
Reduction function
to be effective when
panning or shooting
night scenes, etc.
Turn off the Shake Reduction function and
use a tripod.
The subject is too
close Move away from the subject, or turn off the
Shake Reduction function and use a tripod.
Problem Cause Remedy