Pentax *istDL2, Руководство по эксплуатации

Страница: 93 / 215

91
3
B
asic Op
er
atio
ns
1
Use the four-way controller (
23
) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2
Press the 4 button.
The Print w/DPOF settings screen
appears. Use the four-way controller
(
45
) to check the number of copies
for each image, whether the date is
imprinted or not, and total number of
copies. Print settings are set with the
Print Service. (p.81)
3
Press the
4
button.
The print settings confirmation screen appears.
Refer to Steps 7 and 11 of “Printing Single Images” (p.88 and 89) for
details on how to change the settings.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the
3 button to cancel printing.
Disconnect the cable from the printer when you have finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
Printing Images Using the DPOF Settings
Disconnecting the Cable from the Printer
1
10 10
Date Date Copies Copies
Total Total
1
10
Date
OK
Copies
Total
Print Print Print
Print w/DPOF settings Print w/DPOF settings Print w/DPOF settings