Pentax 645 NII, Руководство по эксплуатации

Страница: 51 / 100

ADV
A
NCE
D
OP
ERATIONS
49
4. Turn either the shutter dial or lens aperture ring
until a single bar is displayed in the center of the
bar graph.
5. When the shutter release button is pressed half-
way, the shutter speed, approximate aperture and
bar graph will be displayed in the viewfinder.
•
When the bars are displayed to the
j
side on the bar
graph, it indicates overexposure and when the bars are
displayed to the
o
side, it indicates underexposure.
•
Moving one bar on the bar graph indicates 1/3 step
(EV). However, when under or over exposure is set
3 or - 3 steps (3EV),
j
or
o
indicator will
blink.
•
In flash photography, when you use the flash sync shutter
speed of 1/60 second or a non-dedicated external flash
unit, set the shutter dial to the
e
(1/60 of second) position.
* Exposure Warning
If the subject is too bright or too dark, the selected shutter
speed will blink in the viewfinder as a warning as shown.
When the subject is too bright, choose a smaller aperture;
when it is too dark, choose a larger aperture. When the
shutter speed indication stops blinding, you can take a
picture. If both shutter and aperture blink, It means that
the exposure is out of metering range and unable to
obtain a correct exposure even if the aperture is adjusted.
Select a darker subject or use a flash if it is too dark.
3 4 5 *