Pentax 19033 - Optio W10 Digital Camera, Руководство по эксплуатации

Страница: 88 / 208

86
4
Tak
ing Pi
cture
s
The procedure for setting the focus manually (
\
) is described below.
1
Press the four-way controller (
5
)
in
A
mode.
2
Use the four-way controller (
5
) to
select
\
and press the 4 button.
The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.
3
Press the four-way controller
(
23
).
The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (
23
) to adjust the focus using
the indicator as a guide.
2 : for distant focus
3
: for closer focus
4
Press the 4 button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (
5
).
After the focus is fixed, you can press the four-way controller ( 5 ) again
to display the \ bar and readjust the focus.
• In
y
mode, the focus mode is set to
s
.
• In
A
mode, you can only select = and
q
.
Saving the Focus Mode
1
p.103
Manual Focus
To switch from
\
to another focus mode, press the four-way
controller ( 5 ) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
F o c u s M o d e F o c u s M o d e F o c u s M o d e
M a n u a l F o c u s M a n u a l F o c u s M a n u a l F o c u s
OK
O K O K O K
OK O K O K O K
3 8 3 8 3 8
2m 2m
0.5 0.5
1 1
2m
0.5
\
indicator