Pentax 17601 - Optio P70 Digital Camera, Руководство по эксплуатации

Страница: 197 / 256

195
7
Se
ttings
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1
Press the 3 button in
Q
mode.
The [
W
Setting] menu appears.
When you press the 3 button in
A
mode, press the four-way
controller (
5
) once.
2
Use the four-way controller (
23
) to select [Power
Saving].
3
Press the four-way controller (
5
).
A pull-down menu appears.
4
Use the four-way controller (
23
)
to select the time until the camera
enters power saving mode.
Choose from [2min.], [1min.], [30sec.],
[15sec.], [5sec.] or [Off].
5
Press the 4 button.
The setting is saved.
Using the Power Saving Function
• Power Saving does not function in the following situations:
- while taking pictures in Continuous Shooting mode
- in the playback mode
- while recording a movie
- while the camera is connected to a computer or printer
- when using the AC adapter
- while a menu is being displayed
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
2 / 3
2 min.
Off
5 sec.
3 0 sec.
1 min.
1 5 sec.
Setting
Power Saving
Auto Power Off
Reset
Video Out
Brightness Level
MENU Cancel OK OK
Delete all images