Pentax 17491, Руководство по эксплуатации

Страница: 86 / 272

84
3
Ta
kin
g
Pictur
es
The digital zoom is set to
O
(On) in the default settings. To take pictures
using only the optical zoom and Intelligent Zoom, set the digital zoom to
P
(Off).
1
Press the
3
button in
A
mode.
The [
A
Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [Digital
Zoom].
3
Use the four-way controller (
45
)
to select
O
(On) or
P
(Off).
O
(On) Uses Digital Zoom
P
(Off) Uses only optical zoom and
Intelligent Zoom
The setting is saved.
4
Press the
3
button.
The camera returns to capture status.
• It is recommended to use a tripod to prevent camera shake when
taking pictures at a high magnification rate.
• Pictures taken in the digital zoom range appear grainier than pictures
taken in the optical zoom range.
• Intelligent Zoom is not available under the following conditions:
- when the recorded pixels is set to
E
/ / / (24× optical
zoom and Digital Zoom are available)
- in
c
(Digital SR) mode (only 24× optical zoom is available)
- when the sensitivity is set to 3200 or 6400 (only 24× optical zoom is
available)
• The image enlarged using Intelligent Zoom may appear rough on the
display. This does not affect the quality of recorded image.
• While recording a movie, only Digital Zoom is available.
To Set the Digital Zoom
Saving the Digital Zoom Function setting
1
p.147
3:2 16:9 1:1
Rec. Mode
Memory
Green Button
MENU
Exit
3 / 4
Blink Detection
Digital Zoom
Instant Review
Interval Shoot
e_kb484.book Page 84 Wednesday, March 18, 2009 5:23 PM