Pentax 15936, Руководство по эксплуатации

Страница: 186 / 225

184
8
Conne
ctin
g to a
Com
puter
Connect your camera to the computer using the provided USB cable
(I-USB116).
1
Turn the computer on.
2
Turn your camera off.
3
Connect your camera to the computer using the USB
cable.
Face the
}
mark on the USB cable towards the
4
mark on the
camera, and connect the cable to the PC/AV terminal.
4
Turn your camera on.
The camera is recognized by the computer.
Connecting the Camera and the Computer
If the battery runs out of power while images are being transmitted to the
computer, the image data may be lost or damaged. Charge the battery
fully before connecting your camera to the computer.
• The self-timer lamp blinks while the camera is connected to a
computer.
• If there is no SD Memory Card in the camera, the images stored in the
built-in memory can be viewed with a computer.
• For information on system requirements, refer to p.186.