Pentax 14748, Руководство по эксплуатации

Страница: 231 / 383

229
6
Sho
o
ting
Setti
ngs
3
Enter the text.
Up to 18 single-byte
alphanumeric
characters and
symbols can be
entered.
Available operations
4
After entering the text, move the text selection cursor to
[Finish] and press the
4 button.
The name is changed.
Repeat Steps 2 to 4 to change the names of other
A modes.
5
Press the 3 button.
1
Select [Check Saved Settings] in Step 3 of “Saving the
Settings” (p.227) and press the four-way controller (
5
).
The [Check Saved Settings] screen appears.
2
Use the four-way controller (
23
) to select [ A 1] to
[
A
5] and press the four-way controller (
5
).
The current settings saved in the selected A mode are displayed.
Four-way controller
(
2345 )
Moves the text selection cursor.
Rear e-dial (
S
) Moves the text input cursor.
|
button Switches between upper and lower case letters.
4 button Enters a character selected with the text selection
cursor at the position of the text input cursor.
i button Deletes a character at the position of the text
input cursor.
Checking the Saved USER Settings
Rename USER Mode
USER1
Cancel
Delete One Character
Enter
Finish
OK MENU
USER1
Text selection
cursor
Text input cursor