Pentair Raychem HWAT System, Инструкция по установке и эксплуатации

Страница: 98 / 110

3
Programming the Controller
44
EN-RaychemHWATECOcontroller-IM-H57340 03/13
required to return back to the maintain temperature
after the Heat-Up cycle is complete and the heating
cable is off, refer to “Chapter 7, Cool-Down Graph.”
Holiday
This menu is used to set the controller to Off, timed-
off, or to resume your timer program.
On: The controller uses the normal operation the
timer program.
Off: The controller will not power the system until
you select “Use timer”.
xx Days off: You can select a number of days. The
controller automatically returns to timer mode when
the selected number of days have passed.
Info
The display shows the firmware version number,
selected cable type and the current sensor tempera-
ture. Press Enter twice to update the sensor tem-
perature on the display.