Pentair FLECK 9100 SXT, Руководство по установке

Страница: 14 / 108

Installer manual Fleck 9100 SXT - Description
14 / 108 Ref. MKT-IM-004 / E - 06.10.2020
3 Description
3.1 Technical specifications
Design specifications/ratings
Valve body PPO (Polyphenylene oxide)
Rubber components EP or EPDM
Valve material certification DM174, ACS
Weight (valve with controller) 3 kg (max)
Recommended operating pressure 1.8 - 8.6 bar
Maximum inlet pressure 8.6 bar
Hydrostatic test pressure 20 bar
Water temperature 1 - 43°C
Ambient temperature 5 -40°C
Flow rates (3.5 bar inlet - valve only)
¾" 1"
Continuous service flow (Δp = 1 bar) 4 m
3
/h 4.5 m
3
/h
Peak service flow (Δp = 1.8 bar) 5.4 m
3
/h 5.9 m
3
/h
Cv* 4.8 gpm 5.2 gpm
Kv* 4 m
3
/h 4.5 m
3
/h
Maximum backwash flow
(Δp = 1.8 bar) 1.9 m
3
/h 1.9 m
3
/h
*Cv: Flow rate in gpm across the valve at a pressure drop of 1 psi at 60°F.
*Kv: Flow rate in m
3
/h across the valve at a pressure drop of 1 bar at 16°C.
Valve connections
Tank Thread 2½" - 8NPSM
Inlet/Outlet ¾" or 1" BSP, male
Riser tube 26.7 mm O.D., 1.05" tube
Drain line ½" O.D.
Brine line (1600/1610) ⅜"
Electrical
Transformer input voltage 230 VAC
Input supply frequency 50 or 60 Hz
Transformer output voltage 24 VAC
Motor input voltage 24 VAC
Controller input voltage 24 VAC
Controller max. power consumption 8 W