Pentair Fleck 5800 XTR, Руководство по установке

Страница: 101 / 126

Installer manual Fleck 5800 XTR - Maintenance
Ref. MKT-IM-006 / E - 12.11.2019 101 / 126
9.4.4 Power head disassembly/replacement
1. Remove the controller, see Controller replacement [
}
Page 100].
2. Using a 6 mm wrench or flat screwdriver, unscrew ( 2 ).
3. Using a 8 mm wrench or flat screwdriver, unscrew ( 1 ).
4. Separate the power head ( 3 ) from the valve body ( 4 ).
5. Change the power head ( 3 ).
6. Reverse above procedure steps to rebuild. Mind the core marker and align the small holes of
the gears for easy reassembly.
Caution - material
Risk of damage due to bad mounting !
When assembling the gearing system ( 3 ) on the valve body ( 4 ), make sure to put the
brighter part of the piston axe ( 5 ) on the left as shown beside.
Tip
These operations need to be performed before any cleaning or maintenance procedure.