Pentair AUTOTROL 360, Руководство по обслуживанию

Страница: 7 / 12

CONTROL OPERATION AND LAYOUT
Simple Control Operation
A simple three-step cycle control knob operates the cleaning
cycle for continued operation.
Indicator Light (361 Only)
A visual indicator shows when the system is in a cleaning cycle.
Easy Access Cover Removal
No tools are required to remove cover to access valve assembly
for service and repair.
Remove
Cover
Indicator
Light
(361 Only)
Control
Knob
Figure 7
INITIATING A CLEANING CYCLE
Under normal operation, the indicator arrow on the side of the
valve body points to the Service icon (361) or "0" (360) on the
control knob.
Figure 8 361 Valve In Service
Figure 9 360 Valve In Service
Manual Cleaning Cycle (360 Valve)
1. To start a cleaning cycle, turn the control knob counter-
clockwise until the indicator arrow is lined up with "1". The
system will backwash, flushing water through the filtration
media in the tank.
2. Turn the control knob counter-clockwise until the indicator
arrow is lined up with "2". Water will flow to drain.
3. Turn the control knob counter-clockwise to line up the
indicator arrow with "0" to return the system back to
normal operation.
Semi-Automatic Cleaning Cycle (361 Valve)
1. To start a cleaning cycle, turn the control knob counter-
clockwise until the indicator arrow is lined up with the
Recycle icon
.
2. The system will automatically cycle through a backwash
(20 minutes) and rinse (6 minutes) and return to normal
operation.
NOTE: The indicator light on the front valve cover will
illuminate during regeneration.
361 Remote Regeneration
An optional remote regeneration kit (P/N 4002561) is available
for the 361 valve to enable fully automatic regeneration. When
the kit is installed, a remote switch (such as a differential
pressure switch) can be connected to the valve to control
cleaning cycle initiation.
AUTOTROL 360/361 Filter Valves • 7