Assembling SIM card, Micro SD memory card and battery
1. If the device is on, press and hold the Power/Lock key and select Power off
OK to turn it off.
→
2. Remove the back cover, use fingernail to gently lift the back cover.
3. Insert the SIM card and Micro SD card with the contacts facing down.
4. Replace the battery.
5. Replace the back cover.
Battery charging
It is recommended to charge and discharge the battery several times so that
it reaches its full performance and service life.
In the top right corner of the main menu there is an icon representing the
battery charge. When the icon is filled with bars, it means the battery is fully
charged. If the icon is empty, the battery is very low and you have to charge it
as quickly as possible. The battery will start charging automatically after
connecting the device to the AC charger or when connected to a computer via
the supplied USB cable.
Connecting to the computer
NOTES:
•
To install applications and store your own files you can use either a
memory card and flash memory.
•
When the data are being transferred, do not disconnect the device from
the computer to prevent the possible damage or loss of data.
The device works with the following operating systems: Windows Me /
2000 / XP / Vista / 7 / 8.
After connecting operating device to the computer via a USB cable on the
device in the status bar, select USB connected and then Turn on USB storage.
The device will be detected by the computer as a portable hard disk and will
be visible in Windows Explorer.
6
