PENSOTTI PNCC-32N, Инструкция по эксплуатации, Страница: 64 / 81

INSTALLATION INSTRUCTIONS
61
P
ARAMETER
P13
–
C
ENTRAL HEATING
M
INIMUM
S
ET POINT
This parameter is used to set the central heating minimum user set
point.
To enter the parameters menu, follow the previously described
procedure (
see paragraph
5.2 ‘Accessing the parameters menu’
-
steps 1-5).
6.
Use ‘ ’ and ‘ ’ buttons (D.H.W temperature setting)
to
modify the value of the parameter within the prescribed limits
(displayed in Fahrenheit degrees):
68
– 104 (standard appliances)
68 - 86 (reduced for under-floor heating)
7.
Press mode selection button ‘ ’ to confirm and to render the
new adjustment operative. The parameter number (P13) will appear
on the display.
8.
To exit from the parameters menu, press simultaneously ‘ ’ and
‘ ’ buttons.
P
ARAMETER
P14
–
C
ENTRAL HEATING
M
AXIMUM
S
ET POINT
This parameter is used to set the central heating maximum user set
point.
To enter the parameters menu, follow the previously described
procedure (
see paragraph
5.2 ‘Accessing the parameters menu’
-
steps 1-5).
6.
Use ‘ ’ and ‘ ’ buttons (D.H.W temperature setting)
to
modify the value of the parameter within the prescribed limits
(displayed in Celsius degrees):
104
– 185°F (standard appliances)
104
– 125°F (reduced for under-floor heating)
7.
Press mode selection button ‘ ’ to confirm and to render the
new adjustment operative. The parameter number (P14) will appear
on the display.
8.
To exit from the parameters menu, press simultaneously ‘ ’ and
‘ ’ buttons.
P13
40
P13
30
80
P14
90
P14