Penn A421ABC-02C Скачать руководство пользователя страница 1

A421 Series Standard Electronic Temperature Controls Installation Instructions

 Refer to the 

QuickLIT website

 for the most up-to-date version of this document.

1

Applications

  

The A421 Series Electronic Temperature Controls are 
single-stage, electronic temperature controls with a 
single-pole, double-throw (SPDT) output relay. 

A421 controls feature a backlit LCD with adjustable 
brightness and three-button touchpad interface that 
can be set up to restrict user adjustments. An LED 
indicates the output relay's On/Off status. 

A421 controls have simple On and Off temperature 
settings for heating or cooling, an adjustable anti-short 
cycle delay, temperature setback, and sensor offset 
capability. The temperature control range is 
40 to 212°F or -40 to 100°C. 

The A421 controls are available either in Type1 
(NEMA), IP20 (CE), high-impact plastic enclosures 
suitable for surface or DIN rail mounting (Figure 1) 
or in Type 4X (NEMA), IP66 (CE) watertight, corrosion 
resistant surface mount enclosures (Figure 2).

Dimensions

   

IMPORTANT:

Use this A421 Series Electronic 

Temperature Control only as an operating control. 
Where failure or malfunction of the A421 control could 
lead to personal injury or property damage to the 
controlled equipment or other property, additional 
precautions must be designed into the control 
system. Incorporate and maintain other devices, such 
as supervisory or alarm systems or safety or limit 
controls, intended to warn of or protect against failure 
or malfunction of the A421 control.

IMPORTANT:

Utiliser CE A421 Series Electronic 

Temperature Control uniquement en tant que 
dispositif de régulation. Lorsqu'une défaillance ou un 
dysfonctionnement du A421 control risque de 
provoquer des blessures ou d'endommager 
l'équipement contrôlé ou un autre équipement, la 
conception du système de contrôle doit intégrer des 
dispositifs de protection supplémentaires. Veiller 
dans ce cas à intégrer de façon permanente 
d'autres dispositifs, tels que des systèmes de 
supervision ou d'alarme, ou des dispositifs de 
sécurité ou de limitation, ayant une fonction 
d'avertissement ou de protection en cas de 
défaillance ou de dysfonctionnement du 
A421 control.

Figure 1: A421 Control with Type 1 (NEMA),

IP20 Enclosure Dimensions, in. (mm)

Figure 2: A421 Control with Type 4X (NEMA), 

IP66 Enclosure Dimensions, in. (mm)

A421 Series Standard Electronic Temperature 
Controls

Installation Instructions

A421ABC-x, A421AEC-x, 
A421GBF-x, A421GEF-x

Part No. 24-7664-3019, Rev. B

Issued November 6, 2015

Содержание A421ABC-02C


















Отзывы: