Installing Drivers for 6000 Boards
3.2.5.
Refresh Device
If a PenMount device is not attached during device driver installation, user can still install
by using the
Refresh
feature in the PenMount Control Panel.
3.2.6.
Uninstall PenMount Windows Universal Driver
1. Go to Control Panel. C
lick “Add/Remove program”. Select ”PenMount
Windows
Universal Driver”, and click on the “Change/Remove” ( Windows
XP ) or “Uninstall/Change” ( Windows 7 / 8 ) button.
2.
Select ‘Uninstall’ to remove PenMount Windows Universal Driver.
3.3.
Install PenMount X Window Driver on Linux
Before installing
PenMount Linux X Window RS-232/USB Driver
for PenMount 6000
boards, you must have had Linux X Window installed and running on your computer.
You
must also have installed one of PenMount 6200D, 6202B, 6300A or 6500A control
boards.
PenMount Linux X Window RS-232
and
USB Drivers
for 6000 boards support the
following operating systems:
Linux Distributions
RS232
USB
Содержание Touchscreen 6000
Страница 1: ...i PENMOUNT TOUCHSCREEN 6000 CONTROL BOARD INSTALLATION GUIDE Revision 1 8 20 November 12...
Страница 12: ...Chapter 2 Installing PenMount 6000 Control Boards...
Страница 13: ...Installing PenMount 6000 Control Boards 7 2 2 3 The connection of 6300A Control Board for USB Interface Only...
