P
P
E
E
S
S
1
1
9
9
0
0
0
0
G
G
i
i
G
G
S
S
M
M
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
PES1900NR Operations Manual
Chapter 9. Configuring the Repeater — 143
ACU I/O Controls Tab
The
I/O Controls
tab (see Figure 129)
turns the 2 relay outputs and digital
outputs ON or OFF.
1. Toggle the appropriate output
either ON or OFF.
2. Click
the
Apply
or
OK
button.
•
The
Apply
button turns the
selected outputs either ON
or OFF, and keeps the
ACU
Properties
screen open.
•
The
OK
button turns the
selected outputs either ON
or OFF, and closes the
ACU
Properties
screen.
ACU Alarms Setting Tab
The
Alarms
tab (see Figure 130)
redefines alarm severity for ACU subsystems.
1. Click the down-arrow next to
an
Alarm
field, to select one of
the following alarm severity
settings:
•
Disabled
•
Event
•
Minor
•
Major
•
Critical
NOTE:
Alarm settings for External
Input 1 and External Input 2
are initially set to Disabled.
2. Click
the
Apply
or
OK
button.
•
The
Apply
button
changes the alarm
severity, and keeps the
ACU Properties
screen
open.
•
The
OK
button changes the alarm severity, and closes the
ACU Properties
screen.
The following types of alarms can be set:
•
External Input Alarms (1 and 2):
An alarm generated from optional, external equipment.
•
Temperature Alarm
: The temperature threshold of the repeater system has been
exceeded.
•
Tamper Alarm:
The repeater primary cabinet door is open.
Figure 129 ACU Properties Screen,
I/O Controls Tab
Figure 130 ACU Properties Screen,
Alarms Tab