
P
P
E
E
S
S
1
1
9
9
0
0
0
0
G
G
i
i
G
G
S
S
M
M
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
— Chapter 9. Configuring the Repeater
PES1900NR Operations Manual
134
Defining Alarm Severity
The repeater is factory-configured with a standard set of alarm severity settings. You can use the
subsystem
Properties
screens to adjust alarm severity, from these defaults. See
Configuring
Repeater Properties
, for more information about alarm severity and the factory configuration.
The levels of alarm severity are:
•
Critical
•
Major
•
Minor
•
Event
•
Disabled
To define alarm severity, use the following procedure.
1. Login to a session with the repeater.
2. Select
Configuration
from the Main Control menu bar, and then select a subsystem, to open
its
Properties
screen.
For example, select
Configuration
->
Channel 1
. The Alarms tab displays.
For actual screen examples, see
Configuring Repeater Properties
.
3. Click the down-arrow next to an
Alarm
field, to select a new alarm severity.
4. Click
the
Apply
or
OK
button to change the alarm severity.
The
Apply
button changes the alarm severity, and keeps the Channel Properties screen
open.
The
OK
button changes the alarm severity, and closes the Channel Properties screen.
Configuring Repeater Properties
Use the subsystem
Properties
screens to configure the repeater.
To open a Properties screen, select one of the following subsystems from the
Configuration
menu:
•
Front
End
•
Channel
1
•
Channel
2
•
Alarm Control Unit
•
Modem
•
Cellular
Phone
•
Power
System
•
UPS
•
Hardware
Settings
The Properties screens display tabs that are specific to each subsystem.
NOTE:
Screens shown in this manual might not exactly match what you see on the PC or laptop.
Two types of repeater properties can be configured:
•
Redefine alarm severity.
•
Specify operational settings for the repeater.