Penguin Water 200-PWARO Series, Руководство пользователя, Страница: 7 / 30

Quick Connect Fittings
Many RO systems utilize quick connect fittings. These user-friendly fittings provide supe-
rior performance and are provided with this system. Proper use of these push-in fittings is
shown below. Along with these fittings, all tubing selected must be of high quality and
must be cut with a plastic tube cutter or sharp razor with a clean, square cut.
How To Make a Connection
1. Cut the Tube Square - It is essential that the outside diameter be free from score
marks and that burrs and sharp edges be removed before inserting the tube into the
fitting. For soft, thin walled tubing, we recommend the use of tube inserts.
2. Insert Tube - The fittings will grip before a seal is formed. Ensure the tubing is push-
ed fully into the tube stop.
3. Push up to the Tube Stop - Push the tubing into the fitting, up to the tube stop. The
collet (gripper) has stainless steel teeth which hold the tubing firmly in position while
the O-ring provides a permanent, leak proof seal.
4. Pull to Check Secure - Pull on the tubing to check that it is secure. It is a good prac-
tice to test the system prior to leaving the site and/or before use.
7